|
|
Post by Paul42 on Jul 13, 2008 12:14:47 GMT -8
Does Doug or anyone else know what type of fittings are supposed to go on the back of the KP Component guages? It looks like a 1/8" compression fitting but the thread is about 1/4" size and it doesnt have much of a taper on it. I went to Coast to Coast and it doesnt look like pipe or flare threads. The mounting nuts are metric so maybe it is some metric fitting?
|
|
|
|
Post by low_blazer on Jul 13, 2008 14:49:34 GMT -8
they are 1/8" npt on the back....
|
|
|
|
Post by Paul42 on Jul 13, 2008 17:00:33 GMT -8
So you need some type of push on air fitting that screws to the guage? Mine looks more like 1/4" npt though.
|
|
|
|
Post by low_blazer on Jul 13, 2008 18:36:11 GMT -8
yeah, I know they look bigger than they are ,but they/re 1/8" npt..I promise. Yeah, you'll need a couple 1/8" npt x 1/8" ptc's.....you can probably get compression fittings for them, but since there's no inner tube, the ferrule can crush the tube pretty easily..
|
|
