|
|
Post by WireNut on Apr 10, 2008 18:04:01 GMT -8
hello well the omg is because something got done to the blazer so i thought i would update. all my help is coming from Bret who i owe so many thank yous too well on to the updates first off  this is where i got a bolt on s10 blazer 4 link from but they dont tell you until you get it they have never put it on a blazer frame it is just the s10 pickup 4link so it should work EH wrong ok now on to the pics       |
|
|
|
Post by ßɭĬƮƵ on Apr 10, 2008 22:45:10 GMT -8
looks good...
|
|
|
|
Post by droppedoff on Apr 11, 2008 6:25:01 GMT -8
That is an OMG! Good to see you're doing something with the Blazer, and that Bret's helping you out.
Yea, I would never order anything from Cando with Doug in this state, and Doug hasn't ripped off a bunch of minitruckers like Steve did.
|
|
|
|
Post by low_blazer on Apr 11, 2008 16:12:17 GMT -8
That is an OMG! Good to see you're doing something with the Blazer, and that Bret's helping you out. Yea, I would never order anything from Cando with Doug in this state, and Doug hasn't ripped off a bunch of minitruckers like Steve did. lmao. Andy, I'm pretty sure I told you somewhere along the line to be careful about that kit  Glad to see you're making some progress.. |
|
|
|
Post by WireNut on Apr 11, 2008 18:01:58 GMT -8
oh yea you told me i know and i thought i knew better but i dont haahaha but yea a few little mods and she should be draggin back to my house again . oh yea as a side note it did run and drive under its own power into bret's garage he can vouch for it . i actually left it running on the trailer while i towed it to his house.
andy
|
|
|
|
Post by WireNut on May 3, 2008 20:29:54 GMT -8
ok well we finally got all the crap with the 4 link situated ,the front cross member is put in . yea it sucks i do get 10 degrees of pinion 0 @ ride hieght and five ethier way up and down. so i told him to start buttoning everything up so he got the brigde and bag brackets in place.  sorry for the cell phone pic thats all i got from the installer |
|
|
|
Post by WireNut on Jun 10, 2008 2:17:15 GMT -8
   media.putfile.com/first-air-downand here is a video of it droping under it own power well these are pics befor it was completed it is done now the shocks are in and fully welded |
|
|
|
Post by crafty1 on Jun 10, 2008 19:41:33 GMT -8
Looki'n good.....
|
|
|
|
Post by WireNut on Aug 23, 2008 2:34:42 GMT -8
|
|
|
|
Post by vio0633 on Aug 23, 2008 11:11:59 GMT -8
Looks good buddy! I think you forgot to put your rear seats back in bro? LOL!!! What size valves you running? |
|
|
|
Post by WireNut on Aug 23, 2008 15:16:34 GMT -8
im running 3/8 valves 1/2 line nah no back seat for me i having people climb threw the truck just to sit in it so it will end up just a two seater
|
|
|
|
Post by lows10blazer on Oct 1, 2008 11:03:18 GMT -8
looks good cant wait till i do the rear of mine
|
|
|
|
Post by WireNut on Jul 17, 2009 0:52:23 GMT -8
|
|
|
|
Post by WireNut on Jul 26, 2009 0:21:51 GMT -8
ok so i got one piece fully welded and filler paneled in. and yes i know i suck at welding its not pretty but it does penetrate and will be cleaned up. here is the ful front piece  pass side filler pieces  drive shaft filler  driver side fillers  and here is the frame i made for the top lid to sit on and where is it go in the truck   here are the filler pieces for the back section and the side walls  and also some pics of my dads project he just got done paint in sublime green.   |
|
|
|
Post by crafty1 on Jul 26, 2009 14:07:52 GMT -8
Lookin' good.... Love the Dart....
|
|
