|
|
Post by low_blazer on Apr 11, 2008 14:27:08 GMT -8
nah, they haven't changed anything on that kit as far as I know....KP's usually pretty good about figuring things out before they put them on the market. And if you can get it for $950, grab it.
|
|
|
|
Post by Paul42 on Apr 18, 2008 17:18:17 GMT -8
Got all my parts for my first order. Thanks Doug. I still need to get rear bags and the KP 6-link and maybe front drop spindles. I dont know how low I can go with the 22's and not hit the fender wells. I am going to be running nitrogen only. No noisy compressors for me.  |
|
|
|
Post by droppedoff on Apr 19, 2008 8:55:21 GMT -8
Sweet
Are those things in the shrink wrap supposed to be bag cups? They're huge, lol.
|
|
|
|
Post by Paul42 on Apr 27, 2008 14:00:21 GMT -8
Those are the bag cups.
Does anyone know where to get pillar pods at for my guages? I want to mount all 3 on the pillar and I remember seeing them custom made for your model vehicle. They replace the entire plastic pillar piece not just a add-on.
|
|
|
|
Post by Paul42 on Apr 27, 2008 14:15:38 GMT -8
|
|
|
|
Post by Paul42 on May 10, 2008 13:34:20 GMT -8
Some updates, I finally figured out how I wanted to plumb up my valves. I am going to mount the tank under the bed so I might make a sheetmetal splash shield for the valves so they dont get all wet and muddy during the winter months.  Also I picked up a KP components catilever 6 link off craigslist for $900. It is still brand new but has been sitting around a few years.  I still need to get my rear bags, drop spindles, nitrogen regulator, 3 pod pillar panel, and tires. And I'm sure I'll run into more things I need along the way. Also I just bought a house in Monroe and it has a 3 car extra large garage and a driveway thats not a hill! I might be able to get some work done on this thing once I move in! |
|
|
|
Post by droppedoff on May 10, 2008 15:06:49 GMT -8
Nice Paul, and Monroe is like 5 minutes from my house. I'll have to stop by sometime.
|
|
|
|
Post by Paul42 on May 10, 2008 15:49:55 GMT -8
Nice Paul, and Monroe is like 5 minutes from my house. I'll have to stop by sometime. I didnt think Monroe was 5 minutes from anywhere. Where are you at? |
|
|
|
Post by droppedoff on May 10, 2008 17:28:24 GMT -8
Well it might be a little more than 5 minutes, but not much. I'm in part of unincorporated Everett south of Lake Stevens and just West of Machias to get technical, lol. It's just a couple minutes from the interchange of Hwy 9 and 2.
|
|
|
|
Post by davaflav on May 11, 2008 18:29:28 GMT -8
hey whats up its dave.
thats funny you know shawn. i live down the road from that schwabby's. the shop next to it bothell import service is my cousins shop.
with 265/35/22 to lay out you will need to do the following.
place bottom of notch 1" obove the stock frame rail.
cut bed for notch and tub it
cut out stock fenders in front.
relocate fuse box and abs box
relocate washer fluid
relocate air box
section stock tranny crossmember
raise the y pipe.
raise the gas tank
like i said on aftermath
get on gmfullsize.com
and give me a call if you need a hand
|
|
|
|
Post by davaflav on May 11, 2008 18:30:26 GMT -8
ohh btw theres a show in bellingham next sunday.
me and a couple friends are gonna roll up with the sittin pretti club.
you wanna roll with us
|
|
|
|
Post by davaflav on May 11, 2008 18:32:24 GMT -8
|
|
|
|
Post by Paul42 on May 12, 2008 12:12:29 GMT -8
Yah I saw posted somewhere you live next to him. I've only talked with Shawn about getting some wheels and tires but I found my rims on Craigslist. I still need the tires but I'm going to wait until I buy everything else first.
What show is in Bellingham?
|
|
|
|
Post by droppedoff on May 12, 2008 16:57:31 GMT -8
What show is in Bellingham? Rollin' low in the 3-6-0. It's hosting by some hispanic club, and put on at WWU. |
|
|
|
Post by davaflav on May 25, 2008 8:47:40 GMT -8
whats the progress on the truck man
|
|
