|
|
Post by low_blazer on May 6, 2008 12:56:27 GMT -8
|
|
|
|
Post by droppedoff on May 7, 2008 10:32:24 GMT -8
yay for progress
|
|
|
|
Post by crafty1 on May 9, 2008 17:52:49 GMT -8
|
|
|
|
Post by low_blazer on May 29, 2008 20:09:34 GMT -8
Couple more pics of the Maz...rear is done minus a couple tabs for brake lines. We got the shock mounts taken care of last weekend, came out pretty nice.   |
|
|
|
Post by slash on May 30, 2008 12:04:08 GMT -8
looks good
|
|
|
|
Post by crafty1 on Oct 6, 2008 16:47:21 GMT -8
Any new updates....
|
|
|
|
Post by vio0633 on Nov 17, 2008 16:05:46 GMT -8
I know this is an old thread...any new updates to this?
|
|
|
|
Post by slash on Nov 18, 2008 7:52:00 GMT -8
How do you drop the exhaust? Or better yet, how do you drop the tranny without dropping the exhaust? I've also had this question in mind, just never have asked. |
|
|
|
Post by low_blazer on Nov 21, 2008 23:00:24 GMT -8
The crossmember is actually welded in, so no dropping of the exhaust is necessary  There's actually enough room to unbolt the trans and slide it back far enought to drop the converter and drop it down....or we can pull the motor/trans out as a whole...we've done that a few times already..lol |
|
|
|
Post by slash on Nov 22, 2008 16:16:20 GMT -8
The crossmember is actually welded in, so no dropping of the exhaust is necessary There's actually enough room to unbolt the trans and slide it back far enought to drop the converter and drop it down....or we can pull the motor/trans out as a whole...we've done that a few times already..lol ah I see... I was actually considering building my tranny crossmember for the blazer in a similar manner, but have it bolt in and platable in a way that I can remove the exhaust prior to dropping the tranny... don't know if that makes sense, but once I get started on this new frame I'll show you what I am referring to. Sucks having to pull the entire motor and tranny though... guess I'm a little on the lazy side ;D |
|
|
|
Post by low_blazer on Jan 29, 2009 19:57:36 GMT -8
|
|
|
|
Post by droppedoff on Jan 29, 2009 20:44:12 GMT -8
fuckin a right
|
|
|
|
Post by crafty1 on Jan 30, 2009 7:27:47 GMT -8
Rock on.... glad to see ya back at it.....
|
|
|
|
Post by low_blazer on Jan 30, 2009 8:31:39 GMT -8
Me too...I actually want to get her done now I'd like to see it running by spring.... |
|
|
|
Post by crafty1 on Jan 30, 2009 9:11:47 GMT -8
Sweet.... I'm hoping that we can have Franks truck ready for paint by this time next year....
|
|
There's actually enough room to unbolt the trans and slide it back far enought to drop the converter and drop it down....or we can pull the motor/trans out as a whole...we've done that a few times already..lol
